Samsung LJ97-02098A Backlight Inverter Boards Replacement Guide for LCD TV Repair

Samsung TV Repair Backlights Not Working on TV Dark Screen & Flickering Image on Screen Problem – How to Repair Fix Tutorial
Click Here to BUY TV REPAIR PARTS: http://bit.ly/ShopJimmyTV

Find Samsung LJ97-02098A Replacement Backlight Inverter Boards at ShopJimmy.com:
http://www.shopjimmy.com/samsung-lj97…

FOLLOW US:
Twitter – @ShopJimmy – <a href="http://twitter.com/shopjimmy" target="_blank" rel=”nofollow”>http://twitter.com/shopjimmy
Facebook – ShopJimmy.com – http://www.facebook.com/ShopJimmy
………………………………………………………………………………………..

The Backlight Inverter Board shown in this video is a compatible substitute for the following Part Numbers, and is a replacement for the following LCD TV models:

Part Numbers:
• LJ97-02098E
• LJ97-02098F
• LJ97-02098C
• LJ97-02098B

LCD TV Model Numbers:
• ALBA LCD40781F1080P
• DYNEX DX-L40-10A
• ELEMENT 40LE45Q
• PROSCAN 40LC45S
• PROSCAN 40LC45S57
• RCA L40FHD41YX7
• RCA L40FHD41YX8
• RCA L40FHD41YX9
• TECHNIKA LCD40-920
• TOSHIBA 40RV525R
• TOSHIBA 40RV52RZ
• TOSHIBA 40XV645U

Top Common LCD TV Problems for bad Backlight Inverter Boards:
• No Backlight
• Has Audio But No Video
• Dim Video (Back Light)
• TV Turns On, Backlight Inverter Immediately Turns Off
• Buzzing Sound From Backlight Inverter Transformers
• Smoke / Burnt Components On Backlight Inverter

………………………………………………………………………………………..

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.

………………………………………………………………………………………..

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the Backlight Inverter Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Backlight Inverter Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let’s get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Backlight Inverter is a part of your TV’s LCD Panel Assembly. The Backlight Inverter is mounted to the back of the Panel close to the left edge, and can be hidden under a metal or plastic cover.
• Backlight Inverters are connected to the panel via small wires or lock into a series of small slot connections built into the panel.
• Carefully unplug all wires by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Please note that the LVDS cable is quite fragile. Two hands may be required to release and remove the connector.
• Unscrew and remove the cover for your part.
• Remove the main board from the chassis.
• Remove the metal plate from the chassis.
• Carefully unplug all wires by hand.
• Unscrew and remove your bad Backlight Inverter Board.
• Slide the board out of the bulb connectors.
• A partial part number for this item can be found printed on the barcode label.
• Search your partial part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Slide the board into the bulb connectors.
• Insert all screws to secure your ShopJimmy New Backlight Inverter Board to the chassis.
• Reconnect all cables.
• Reinstall the metal plate.
• Reinstall the main board.
• Insert all screws to secure the cover for your part.
• Reconnect all cables.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Backlight Inverter Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.

Leave a Comment / Question