Video Tutorial how to replace a 915B403001 bulb – Mitsubishi DLP TV
CLICK HERE to Purchase Your Lamp/Bulb: http://www.shopjimmy.com/catalogsearc…
Click Here to Buy and ESD Wristband! http://bit.ly/SJESDWristBand
This video is designed to be a guide for testing and troubleshooting your TV repair. Please note that other complications may exist that aren’t addressed in this guide. While we always strive to provide accurate and detailed information, we can’t guarantee that it will fix your TV’s issues. If you have any questions, please contact us at email@example.com or (877) 881-6492.
The bulb and lamp shown in this video are replacements for the following DLP Rear Projection TV models:
• MITSUBISHI WD-60735
• MITSUBISHI WD-60737
• MITSUBISHI WD-60C8
• MITSUBISHI WD-60C9
• MITSUBISHI WD-65735
• MITSUBISHI WD-65736
• MITSUBISHI WD-65737
• MITSUBISHI WD-65835
• MITSUBISHI WD-65837
• MITSUBISHI WD-65C8
• MITSUBISHI WD-65C9
• MITSUBISHI WD-73735
• MITSUBISHI WD-73736
• MITSUBISHI WD-73737
• MITSUBISHI WD-73835
• MITSUBISHI WD-73837
• MITSUBISHI WD-73C8
• MITSUBISHI WD-73C9
• MITSUBISHI WD-82737
• MITSUBISHI WD-82837
Bulb replacement for Mitsubishi 915B403001 Lamp
Brought to you by ShopJimmy.com. Visit www.shopjimmy.com to search the hundreds of thousands of TV parts in our inventory.
To properly replace the bulb inside of your DLP Lamp, you will need the following materials.
A Pair of latex gloves
Needle nose pliers
Cup to hold your screws and other small items.
Flat head and phillips screwdriver
A piece of tape or a sticker to use as a marker.
Unscrew and remove the lamp door at the back of your TV.
Loosen the screws on the back of the lamp and gently guide the lamp out of the TV keeping a firm grip on the handle.
Release the lamp plug from the housing by removing the screw that surrounds the plug.
Carefully unlock the plastic clips and slide the two pieces of housing apart.
Pull the plug and wire harness out from the guides and plastic housing.
Release the bulb from the housing by removing the screws and metal bulb clips.
This lamp has two metal bulb clips.
Make sure to note the locations of clips and orientation of the bulb within the housing and orientation of the wires.
Guide the bulb away from the metal insert to remove the bulb from the housing.
Before removing the wire harness from the bulb, mark one wire with a piece of tape or sticker and make a note so that you don’t forget if you have marked the rear or side terminal connections of the wire harness.
Release the rear bulb terminal by removing the nut and washer with a needle nose pliers.
Release the side bulb terminal by removing the screw with a phillips screwdriver.
Prior to installing your new bulb, check both bulbs and verify they are equal.
Reinstall the wire harness. Refer back to your notes to be confirm you have matched the terminal connections correctly and to make sure you have the wires pointing the correct direction.
Guide the bulb back into the metal insert and the plastic housing.
Reinstall the bulb clips and screws referring to your notes to verify that you are placing the clips in the correct locations.
Reconnect the two halves of the housing. Make sure that all screw holes are in line and that all plastic clips are connected, prior to reinserting any screws.
Slide the plug back in place and hold it in place with a screw.
Well look at that you did it, your lamp is now ready to be reinstalled into your TV.
Gently guide the lamp back into the TV keeping a firm grip on the handle.
Tighten all screws until they are hand tight.
Reinstall the lamp door and tighten the door screw.
Plug in your TV and turn the power on and your Shopjimmy replacement bulb will light up immediately.
TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.