Megmeet MLT198TX Power Supply Unit (PSU) Boards Replacement Guide for LCD TV Repair

Find Megmeet MLT198TX Power Supply Unit (PSU) Replacement Boards at ShopJimmy.com:
http://www.shopjimmy.com/megmeet-mlt198tx-power-supply.htm

FOLLOW US:
Twitter – @ShopJimmy – http://twitter.com/shopjimmy
Facebook – ShopJimmy.com – http://www.facebook.com/ShopJimmy
………………………………………………………………………………………..

The Power Supply Unit (PSU) Board shown in this video is a replacement for the following LCD TV models:

LCD TV Model Numbers:
• APEX LD4088
• APEX LD4688
• COBY TFTV4028
• ELEMENT ELDFT421
• ELEMENT ELDTW422
• ELEMENT ELGFW551
• RCA 40LA45RQ
• RCA 46LA45RQ
• VIORE LC42VF56

Top Common LCD TV problems for bad Megmeet Power Supply Unit (PSU) Boards:
• No Power (Dead TV), Red or No Standby Lights
• Bad Capacitors, Blown Caps
• Power Surges
• Low Voltage Readings

………………………………………………………………………………………..

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.

………………………………………………………………………………………..

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the Power Supply Unit (PSU) Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Power Supply Unit (PSU) Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let’s get to it, shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name, model number, serial number, and model code if present.
• Unscrew and remove the back cover.
• The power supply unit takes in and distributes power throughout the TV.
• This board is connected to the power cord or the A/C adapter.
• This power supply is located at the center of the chassis.
• Carefully unplug all wires and ribbon cables by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Unscrew and gently remove the Original Power Supply Unit (PSU) Board from the chassis.
• The part number for this item can be found printed on a barcode label.
• Search your part number on http://www.shopjimmy.com/ to find a compatible replacement.
• Click on the search results to view important product specifications.
• Insert all screws to secure your ShopJimmy new Power Supply Unit (PSU) Board to the chassis.
• Reconnect all cables and ribbon connections.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Power Supply Unit (PSU) Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new!

Thank you for watching one of our many tutorials here at ShopJimmy.com! If you have any further questions regarding your repair, simply post a question in the comments section below or call our award-winning customer service team at the number on your screen. We strive to learn and share new TV repair tips every day. Subscribe to our youtube channel and grow with us. Share our videos with your friends and help us spread the savings. And don’t forget to hit that like button!

Leave a Comment / Question